Reason RE Turn2on HolyVerb v1.0.1 WiN
VST Effects / VST Plugins
29-03-2022
HOLYVERB is a modern effect processor for any kind of incoming audio signal that includes various combinations of modulation and signal change effects. Basically, a signal can be pitch-shifted up to +-2 octaves and then the device can add frequency changes via frequency-shifts.
The Reverb and Delay sections can be routed in Pre/Post positions. The Reverb includes a classical reverberation, but also includes an additional Reverb Increase block based on 3 reverb modes from the legendary EHX (TM) Holy Grail guitar FX pedal. You can apply basic reverb and mix it with this Increase mode which includes a Spring, Hall, or Flerb setting.
The Delay can be synced to the tempo grid or set to run free with lengths in seconds. Feedback settings include Ping-Pong pan, L/R Crossfade and Stereo modes. Feedback at 100% is useful as a loop setting.
The Device includes a Tone parameter to control damping of the Delay, but you can also activate a Filter mode (LP/HP) for this control as a Pre/Rev/Del/Post to add flexibility to effects routing. A built-in Limiter section helps to control the signal output.
The HOLYVERB Rack Extension includes a Modulation matrix on the back panel with 6 slots for both main and hidden parameters. You can use any kind of Midi CC source for modulation of PB, MW and other parameters to utilize HOLYVERB as a live performance device. For example, you can play any instrument that is connected to HOLYVERB while controlling parameters such as PB, MW or expression at the same time via the modulation matrix. This is a very useful feature for use in live performance.
The HOLYVERB Rack Extension is a modern multi-FX effects device with advanced features and flexible possibilities. It allows for a lot of variations for modifying your audio signal, resulting in a unique sound from any kind of source signal.
Features:
- Solid sound of Reverb and Delay combinations
- Increase mode based on well known guitar pedal
- Pitch & Freq shifters, Filter, Modulation matrix
home page:
https://bit.ly/3NvUSR1
Related articles
Reason RE Turn2on Ecruos v1.0.4 WiN
Soft / VST Effects
1-04-2022
ECRUOS is a Delay effect with up to 16 configurable taps include smoothing of delay time changes.
We present a new delay type to Reason Rack Extension - Tap Delay.
Tap Delays usually have steps called as TAPs. Every TAP has its own settings for Delay Time and Level.
Reason RE Turn2on Ghammy Harm v1.1.4 WiN
Soft / VST Effects
31-03-2022
The GHAMMY effect is inspired by the famous guitar / bass pedal WhammyTM where we have enhanced the original with more features in the same vain. GHAMMY includes three fundamental modes: pitch shifting (GHAMMY), harmonizer (HARMY) and DETUNE.
Basic functionality is the main feature of the device, but additional features are available which totally change the main idea of the original effect.
GHAMMY works with two separate modes (BY MODE and DRY/WET). If the device is set to the "BY MODE" setting, the processed signal is presented as only WET. If the device is set to the "DRY/WET" setting, the DRY/ WET proportions can be set manually.
Reason RE Turn2on Sabotage v1.0.2 WiN
VST Effects / VST Plugins
30-03-2022
Introducing a new three band multiple FX Rack Extension.
The Crossover effect splits the incoming audio signal into three bands [Low / Mid / High] with frequency control and morphing.
If you connect any signal to the Main input and activate the Crossover section, you will have 3 bands. This classic crossover effect includes Low and High Frequency control for morphing around three bands.
SABOTAGE is a three band crossover effect that splits an audio signal into Low / Mid / High bands, sending the signal to the Main Output and individual 3-band outputs, but it's not just a crossover effect.