Presenting the INFOBAY OUT device, an interface helper utility that allows you to similarly place labels to keep track of outputs in the Reason rack.

REASON OUT: Set the digits of Reason Output channels (as mono or stereo pairs)

HARDWARE OUT: Set Channel digits of Audio interfaces outputs (multiple interfaces)

OUT TO THE DEVICE: Set names of connected devices to the Reason Outputs

DEVICE TYPE ICON: Use devices icons to identify connected devices at a glance

Introducing a new three band multiple FX Rack Extension.

The Crossover effect splits the incoming audio signal into three bands [Low / Mid / High] with frequency control and morphing.

If you connect any signal to the Main input and activate the Crossover section, you will have 3 bands. This classic crossover effect includes Low and High Frequency control for morphing around three bands.

SABOTAGE is a three band crossover effect that splits an audio signal into Low / Mid / High bands, sending the signal to the Main Output and individual 3-band outputs, but it's not just a crossover effect.

In many situations you can only use one active instrument/fx line from the few incoming signal lines with signal routing selection. The ReSwitch IN Audio selector can help you to switch one or a few input channels that can have the same effects, or play individually at the needed moment.

Introducing an audio switcher with 4 stereo inputs and 1 stereo output.

RESWITCH IN has a routing scheme with two modes.

Psychedelic Haas CV Pulse Stepper is another small and simple device similar to the matrix signal switcher but only for CV pulse input. This one is designed to step the output after each pulse input following the mode setting. This makes it a useful tool when you want to send cv pulses to other outputs based on incoming count of cv pulses.(i.e. for sequencing purposes)

Features:

- CV Pulse Output Switch