Reason RE Turn2on MidBooster v1.1.0 WiN
Soft / VST Effects
1-04-2022
MIDBOOSTER is a modern parametric booster which allows adjustments to be made to the midrange frequencies of an incoming signal using parametric tuning. It can be used in your mix to add new midrange frequencies or to cut out those which aren't required.
The device is useful for solving any problems with frequency balance, e.g. if the sound of the signal is too muddy or muffled. Use MIDBOOSTER to amplify and warm any incoming signal.
The main feature of this effect is the parametric midrange equalizer.
MIDBOOSTER can be a used as a substitute for the guitar "Screamer" effect. Many distortion and "muff" effects pedals cut out a lot of the frequencies in the midrange. If two guitars in the band are playing at the same time, the midrange frequencies fight with each other which results in them almost not being heard at all. In this scenario, use of a midrange booster will help you retain the character of your favorite overdrives and distortions in the mix.
In some cases when a signal processed through effects has a fat midrange it can sound unnatural.
With MIDBOOSTER, you can remove redundant frequencies and enjoy a perfect signal as never before!
Remember, this device is not not just a booster or gain effect, this is a parametric frequency booster. MIDBOOSTER can create completely new tones for your incoming signals, enhancing the character of the signal texture by adding more tone colours and a little extra midrange saturation.
Classic distortion effects are usually limited to High/ Low frequency control with loss of the midrange. Having additional control of the midrange makes it possible to achieve new and richer sounds with your distortion, overdrive or fuzz effects.
The Bandwidth Octave Selection control morphs the frequency sweeping control through the softer/wider peaks to the sharper/steeper peaks in a clockwise direction.
MIDBOOSTER sounds fantastic on overdriven heavy amps and pedals, drums, rhythms and loops. When paired with an overdrive or distortion effect your signal will immediately become clearer and more powerful.
MIDBOOSTER is guaranteed to help improve the sound of your signal.
Features:
- Amplify and Warm any incoming signal
- Retain character of Overdrive / Distortion in mix
- Effective Mid Band Range Parametric EQ Booster
home page:
https://bit.ly/36z09Hc
Related articles
Reason RE Turn2on AngryComp v1.0.0 WiN
Soft / VST Effects
1-04-2022
Introducing a new overdrive effect with a nice range of destruction colors. It is not just an Overdrive, but a much more complex hybrid effect for any kind of sounds.
An Overdriven signal can sound even more interesting if it uses a compressor. These days you can find a few interesting solutions with the use of guitar effects pedals. Many people find this effect very useful to destroy the signal, correcting it in a few ways, and then compressing it. ANGRYCOMP can be easily used to change the sound of a piano, pad, or other similar sound sources into a very hard sound, like a distorted guitar.
The AMP section includes complex solutions to break up your signal.
Reason RE Turn2on Waubaby v1.1.0 WiN
Soft / VST Effects
31-03-2022
WAUBABY is not just another Wah-Wah effect. It is the biggest existing collection of known Wah pedals emulations all in one box. Now it couldn't be easier to select that special Wah tone you need from 29 Wah models and 60 modes. This is a collection of most the popular, most recognized and iconic Wah pedals also including artist signature pedals with further expanded range modes for creating your own ultimate wah tone in the Reason Rack. Now you can have a big bag of Wah pedals all contained within one Rack Extension. This is WAUBABY baby!!!!
Select the frequency range pedal model and sweep it using the pedal with either frequency knob or even a foot controller. From narrow and high to subtle and broad tones everything is possible using the various Wah pedal models and modes of WAHBABY.
Reason RE Turn2on Sabotage v1.0.2 WiN
VST Effects / VST Plugins
30-03-2022
Introducing a new three band multiple FX Rack Extension.
The Crossover effect splits the incoming audio signal into three bands [Low / Mid / High] with frequency control and morphing.
If you connect any signal to the Main input and activate the Crossover section, you will have 3 bands. This classic crossover effect includes Low and High Frequency control for morphing around three bands.
SABOTAGE is a three band crossover effect that splits an audio signal into Low / Mid / High bands, sending the signal to the Main Output and individual 3-band outputs, but it's not just a crossover effect.
Reason RE Turn2on SubColours v2.0.1 WiN
VST Effects / VST Plugins
29-03-2022
Inspired by a 50 year old legendary octave diver effect. Adds sub-octave to inputted signals resulting in warm, fat and synthesized tones.
Device includes classical ringer, powerful screamer, fuzz / distortion destruction effects as well as a limiter, widener and stabilize compressor.
SubColours Octave Diver emulates the Mu-Tron Octave Divider pedal. The tone is warm, fat, and a bit synth-like, as opposed to the crisper, more acoustically-accurate transpositions of modern pitch-shift pedals.