York Audio VH+ 412 P50E WAV
Soft / Samples, Presets, Banks Of Sounds
12-05-2022
The York Audio VH+ 412 P50E Cab Pack is based on a VHT Fatbottom 4x12 cabinet loaded with the original Eminence P50E Speakers. The tone is mean and aggressive with a thick low end, throaty midrange, and a top end with nice bite and air to give your tone presence and width in the mix. While this cabinet is typically used for heavier music, its forward midrange gives a "woodiness” to mid gain tones and sounds surprisingly good with clean amps.
This Cab Pack features 136 Single Mic files captured with thirteen hand-selected microphones and 17 of York Audio's famous Multi-Mic Mixes designed to give you killer results with minimal tweaking for a total of 153 IRs.
Microphones used in this Cab Pack
Dynamic:
57m - Based on a modern Shure SM57
57v - Based on a vintage Shure Unidyne III SM57
58 - Based on a Shure SM58
SM7 - Based on a vintage Shure SM7
421m - Based on a modern Sennheiser MD421
421v - Based on a vintage Sennheiser MD421
906 - Based on a Sennheiser e906
Ribbon:
121- Based on a Royer R-121
160 - Based on a Beyerdynamic M160
313 - Based on a Shure KSM313
N22 - Based on an AEA Nuvo N22
Condenser:
U47 - Based on a Telefunken U47 large diaphragm tube condenser
184 - Based on a Neumann KM 184 Small diaphragm condenser
Ambient:
ROOM 1, 2, and 3 - Captured with a Telefunken U47
REAR 1 and 2 - Captured with a Telefunken U47
SIDE - Captured with a Telefunken U47
SUM - Captured with AEA Nuvo N22
All products have been tested with Fractal Audio Systems™, Line 6™, Strymon™, and Kemper™ hardware, as well as DAW plug-ins to ensure seamless integration with your digital modeling units.
TECH SPECS
All Cab Packs come in .WAV format in 24-bit 96k, 48k, and 44.1k files.
All IRs are 500ms for maximum resolution. Hardware units that require shorter files will automatically truncate 500ms files to the unit's preferred length upon import.
Natural Phase and Minimum Phase versions are provided.
Fractal Audio™, Line 6™ Helix, Atomic™ Amplifire, and most IR loading amp modelers utilize 48k files.
Kemper™ units ulitize 44.1k files.
Strymon™ Iridium and BOSS™ units utilizes 96k files.
home page:
https://bit.ly/3M2tB7S
Related articles
York Audio VLUX 210 P10R
Soft / Samples, Presets, Banks Of Sounds
18-08-2021
The York Audio VLUX 210 P10R Cab Pack is based on a Fender Custom Vibrolux Reverb Amp loaded with the original Jensen P10R 10” Alnico speakers. The tone is a wonderful mixture of full low-mids, complex midrange with character, and an airy top end with a touch of Alnico raspiness for great touch sensitivity, chime, and clarity.
This pack features 114 Single Mic captures and 14 multi-mic Mixes taken with eleven hand-selected microphones for a total of 128 IRs.
York Audio YORK 212 M65 Cream WAV Kemper
Soft / Samples, Presets, Banks Of Sounds
5-07-2021
The York Audio YORK 212 M65 Cream Cab Pack is based on a custom York Audio 2x12 "Golden” cabinet loaded with Celestion G12M-65 Creamback speakers. The slightly oversized dimensions of this cabinet give you the low end fullness of a 4x12 with the focus and clarity of a 2x12. The tone is warm and balanced with rich low-mids, a thick and woody midrange, and a sweet top end range that easily handles both aggressive rhythm tones as well as warm liquid leads. The M65 Cream is a perfect blend of vintage and modern character in a single speaker.