Reason RE Synapse Audio RM-1 Ring Modulator v1.0.2 WiN
VST Effects / VST Plugins
26-09-2021
The RM-1 is a virtual-analog ring modulator with a unique soft-saturation characteristic. Both an internal oscillator as well as mono and stereo side chains are available as a modulation source. Full CV control for all knobs is available on the backside of this rack extension.
A ring modulator multiplies a sound with a modulation signal, typically a sine wave. The result of this ranges from tremolo-type effects at low modulation frequencies to bizarre-metallic sounds at high modulation frequencies.
Multiplying two signals is a trivial task in the digital domain. The RM-1, however, does not do this. Instead, it implements /analog/ multiplication, and thus works in the same way classic analog hardware does. In an analog multiplier, the input signals interact in a highly nonlinear manner. As a result, the output signal gains new harmonics not present in the inputs. The effect of this is an audible and very musical sounding saturation. Its character depends on the level of the input and modulation signal, which can be controlled using the Drive knob in the RM-1.
Analog multipliers have one major downside- the circuits cannot be tweaked such that they offer a perfectly symmetric, balanced multiplication. As a consequence of this, the modulation signal is always audible, and often needs to be filtered out using a gate following the ring modulator. This is fortunately not required in the RM-1, which employs a symmetric network. So only the desirable properties of analog multiplication are modeled.
Parameters of the RM-1 include the aforementioned Drive knob, a modulation signal generator (sine) and a dry/wet control. The modulation signal generator can be replaced with a mono or stereo side-chain signal, allowing to multiply arbitrary signals. The AM/RM switch allows to toggle between amplitude modulation (also known as 2-quadrant or unipolar multiplication) and ring modulation (4-quadrant or bipolar multiplication). All parameters of the ring modulator can be modulated using the CV Inputs on the backside of the rack extension.
Update v1.0.2: Optimized CPU usage
Update v1.0.1: Font issues fixed
Circuit-Modeled Ring Modulator
You need R2R Reason release and TEAM R2R Reason Rack Extension Cache Builder.
home page:
https://bit.ly/3AJvuR1
Related articles
Reason RE Synapse Audio Ninety Vintage Phaser v1.0.2 WiN
VST Effects / VST Plugins
26-09-2021
Synapse Ninety is a software emulation of a legendary 1970s phaser. What makes this phaser unique is the feedback path, which gives the sound a very distinctive character, unlike any other analog phaser. Our emulation employs a zero-delay feedback network, a technique popularized by recent synthesizers, and particularly well suited to emulate analog feedback loops.
Reason RE Synapse Audio DC-2 Dual Chorus v1.1.0 WiN
VST Effects / VST Plugins
26-09-2021
The DC-2 dual chorus offers a warm, sweeping stereo chorus effect based on a two-stage design with well-matched delay times.
Sound parameters include the delay time, modulation rate, depth and a bipolar feedback control. The delay time, modulation rate and feedback parameters can be controlled via CV Inputs on the backside.
Reason RE Synapse Audio AP-12 Analog Phaser v1.0.2 WiN
VST Effects / VST Plugins
26-09-2021
The Synapse AP-12 is a very musical sounding 6/12 stage phaser effect emulating vintage analog hardware.
The Synapse AP-12 emulates vintage analog phasers, which are composed of a series of phase shifting stages with a feedback path wrapped around them. The phase shifting stages (switchable between 6 and 12 stages) are modulated by a LFO, which can be synchronized to the current song tempo. In contrast to most hardware phasers, the AP-12 employs a stereo signal path, allowing the LFO to use different phases on the left and right channel, and thus creating a nice stereo effect. Furthermore, the feedback can be set to both positive and negative amounts, each resulting a in different timbre.